Spindle Lubricating Machine

Cleaning & Lubricating Device For Spindle
SALIENT FEATURE Simple Construction Less Maintenance Zero Leakage Easy to Operate Easy Movable SPECIFICATIONS Length : 800mm Width : 300mm Height : 800mm Opt. Voltage : 220 Volt/1 Phase
	THREE MAIN FUNCTION :
	Suction of used spindle oil from the bolster.
	Flushing inside walls and bearings of the bolster .
	Topping of the bolster with required amount of fresh Oil.

.....................................................................................................................................................................................   Cleans and lubricates spindle bolster quickly and simply.

Topping Gun Flushing Tube Flushing Gun   Tank Capacity For Flushing 24 Liter . For Filling 12 Liter . For Topping 12 Liter . Filter   600 Lt/hr Pump Flushing 1/4 Lpm Fitting/Topping 1/4 Lpm Motor   0.5 hp/ 1440rpm /1@   ADVANTAGES Due to perfect suction, no trace of dirty oil is left in the bolster. Through cleaning is done. Due to auto-leveling system only required amount of oil is filled in the bolster and additional oil is sucked automatically . Hence there is no overflow of oil which otherwise would damage spindle tapes. Operator can very well ascertain that the bolster are cleaned by observing the colour of oil through the transparent PU tube fitted to the flushing gun. Oil after flushing is sucked from the bolster and fitter through the micro-filter and then re-circulated for flushing and cleaning other bolster consumption of oil is ths minimized. Due to correct cleaning and topping of bolster, lubricating frequency of the frame can be reduced. Regular flushing and refilling at recommended intervals will greatly enhance the life of the bolster and spindles. *Due to Continous development the features illustrated above are subject to change without prior    notice