Home
 
Üretici Tekstil Spindles ve


  ÜRÜNLER  



Spindl Yağlama Makinesi

Cleaning & Lubricating Device For Spindle Temizleme ve Spindl için Aygıt Yağlama

Spindl Yağlama Makinesi, Temizleme ve Spindl için Yağlama Cihaz
SALIENT FEATURE Çıkık ÖZELLİĞİ
Simple Construction Basit İnşaat
Less Maintenance Daha az bakım
Zero Leakage Sıfır Kaçak
Easy to Operate Kolay kullanım
Easy Movable Kolay Taşınabilir
SPECIFICATIONS ÖZELLİKLER
Length : 800mm Uzunluk: 800mm
Width : 300mm Genişlik: 300mm
Height : 800mm Yükseklik: 800mm
Opt. Seçmeli. Voltage : 220 Volt/1 Phase Voltaj: 220 Volt / 1 Faz

THREE MAIN FUNCTION : ÜÇ ANA FUNCTION:
Suction of used spindle oil from the bolster. Emiş kullanılan dingil petrol ve destek seçin.
Flushing inside walls and bearings of the bolster . Duvarlar ve yastık ve yataklar içinde Flushing.
Topping of the bolster with required amount of fresh Oil Taze Petrol ve gerekli miktarda destek ve Topping . .

 

.....................................................................................................................................................................................

 

Temizler ve mil hızla ve kolayca destek lubricates.

Topping Gun
Flushing Tube
Flushing Gun

 

Tank Capacity Tank Kapasitesi For Flushing Flushing için 24 Liter . 24 Litre.
For Filling Dolgu için 12 Liter . 12 Litre.
For Topping Topping için 12 Liter . 12 Litre.
Filter Filtre 600 Lt/hr 600 Lt / saat
Pump Pompa Flushing Flushing 1/4 Lpm 1 / 4 lpm
Fitting/Topping Montaj Topping / 1/4 Lpm 1 / 4 lpm
Motor Motorlu 0.5 hp/ 1440rpm /1@ 0,5 kW / 1440rpm / 1 @

 

ADVANTAGES AVANTAJLARI

Due to perfect suction, no trace of dirty oil is left in the bolster. Mükemmel emiş için, hiçbir kirli yağ izine nedeniyle destek olarak bırakılır.
Through cleaning is done. Ile temizlik yapılır.

Due to auto-leveling system only required amount of oil is filled in the bolster and additional oil is sucked automatically . Otomatik nedeniyle sistem sadece petrol miktarı gerekli tesviye ek petrol artıracak ve doldurulur otomatik sucked olduğunu. Hence there is no overflow of oil which otherwise would damage spindle tapes. Dolayısıyla orada da başka iğ şeritler zarar da petrol hiçbir taşma olduğunu.
Operator can very well ascertain that the bolster are cleaned by observing the colour of oil through the transparent PU tube fitted to the flushing gun. Operatör çok iyi olan, şeffaf PU tüp ve siler silah için monte yoluyla petrol rengi gözlemci tarafından temizlenmiş olan destek tahkik edebilirsiniz.
Oil after flushing is sucked from the bolster and fitter through the micro-filter and then re-circulated for flushing and cleaning other bolster consumption of oil is ths minimized. Petrol siler sonra destek kimden sucked ve mikro filtre ile tesisatçısı ve sonra tekrar siler ve diğer petrol tüketimi artıracak temizliği için dağıtılır ths minimize edilmiştir.
Due to correct cleaning and topping of bolster, lubricating frequency of the frame can be reduced. Nedeniyle temizlik doğru ve destek ve malzeme, kare sıklığı yağlama azaltılabilir.
Regular flushing and refilling at recommended intervals will greatly enhance the life of the bolster and spindles. Siler Düzenli ve önerilen aralıklarla büyük ve Spindles destek kullanım ömrünü arttırır doldurulması.
* Due to Continous development the features illustrated above are subject to change without prior    notice * Özellikleri yukarıda gösterildiği Sürekli gelişme nedeniyle, önceden haber verilmeden değiştirilebilir

 

 

Top

 


Designed & Pazar Teknoloji Sun Technology
Home Contact Us Site Map